Printer Issue: Error eMMC 99.39.73 [Solved]


After analyzing the issue that you are facing on your HP LaserJet printer, perform some troubleshooting methods that will help you in resolving the same. Before proceeding the resolving steps, turn off your printer and unplug the power cord. This includes the network cables. Wait for a while and reconnect the same. Print a test page to confirm whether your printer is in the ready state. You have to order a new eMMC to resolve the issue. You need not replace any other components.

Important Note:

By following the suggestions mentioned below, you can resolve the issue. But in case of damage to any component while performing the steps, can damage the entire machine. If you are unsure of performing the same, it is recommended to service your printer from a trusted retailer.

Let us begin the process of servicing your printer.

  • First, remove the formatter cover from your printer. In order to do so, hold the latch on the cover and open the case door by pulling it towards the rear of your printer.
  • Disconnect both the connectors (Which has a black wire attached to it and looks like a plug) and locate the eMMC component on the formatter.
  • Pull the eMMC out to remove it and replace it with a new one. Now, align the eMMC on the formatter until it is seated properly, then push it until you know that it is properly installed.
  • Re-connect the disconnected connectors. Close the formatter cover properly.
  • Uninstall the existing driver, then re-install an updated version of your printer driver.
  • After performing the installation, ensure that your HP printer’s name is displayed on the list of devices.

If the issue still persists, then contact Technical Experts @ Toll-Free 1-877-220-4708 to solve printer issues.

Comments

Post a Comment

Popular posts from this blog

Learn How to Pair Your Google Home Mini to a Bluetooth Speaker

For those of us who have been around Google Home Mini, it is a very well known fact that the device is not the best in playing music while faring well in finding music. The device sounds unclear and metallic. So, while the tech giant has all its hands on fixing this issue, we have found an easy solution to it. Pick your favorite Bluetooth speaker and pair it with the Home device. An additional advantage would be that once you make this speaker as the default device, you need not tell the Home device where the speaker is or fiddle with the controls. Here is how to pair the Google Home Mini with your Bluetooth speaker. Launch the Google Home app. Touch the Devices button in the top right corner. Tap the Menu button in the Devices page and choose Settings. Move down the screen and locate the Paired Bluetooth Devices option. The default speaker menu opes. Make sure the speaker is being put in pairing mode. Long press the Bluetooth button on the speaker to enable the pair...
Read more