How to Clean Page Feeder Manually?


To clean the page feeder manually, go with the instructions given below.

  • Power off the printer.
  • Make sure to disconnect the power cables from the printer and take the remaining paper from the input tray.
  • On your printer, open the front access door to locate the printer's rollers.
  • Rollers are made up of rubber which is black or gray in color.
  • Get a lint-free cloth to clean the rollers.
  • Dip the clean-lint cloth into water or alcohol and wipe the rollers.
  • Ensure not to use a chemical cleaner or organic solvents to clean the rollers.
  • Wait for the rollers to dry and then slide the paper tray back into the printer.
  • Close the printer’s access door and perform a test print. If you still face the paper feed problem after cleaning the roller, change the roller.
To change the roller, go with the instructions given here.
  • Before starting the process, make sure to turn off the printer and disconnect the power cables from it.
  • Open the ink cartridge access door of the printer and then gently remove the printer cartridge out.
  • Now, look for roller inside the printer. Once you see it, release the small white tabs on either side of the roller.
  • To remove the roller from the printer, rotate it and then gently pull it out.
  • Place the new roller in the slot, turn the top of it until it snaps into place.
  • After changing the roller, reinsert the printer cartridge, and then close the access door.
  • Power on the printer and check the printer status.

Comments

Post a Comment

Popular posts from this blog

Printer Issue: Error eMMC 99.39.73 [Solved]

After analyzing the issue that you are facing on your HP LaserJet printer , perform some troubleshooting methods that will help you in resolving the same. Before proceeding the resolving steps, turn off your printer and unplug the power cord. This includes the network cables. Wait for a while and reconnect the same. Print a test page to confirm whether your printer is in the ready state. You have to order a new eMMC to resolve the issue. You need not replace any other components. Important Note: By following the suggestions mentioned below, you can resolve the issue . But in case of damage to any component while performing the steps, can damage the entire machine. If you are unsure of performing the same, it is recommended to service your printer from a trusted retailer. Let us begin the process of servicing your printer. First, remove the formatter cover from your printer. In order to do so, hold the latch on the cover and open the case door by pulling it towards the ...
Read more

Learn How to Pair Your Google Home Mini to a Bluetooth Speaker

For those of us who have been around Google Home Mini, it is a very well known fact that the device is not the best in playing music while faring well in finding music. The device sounds unclear and metallic. So, while the tech giant has all its hands on fixing this issue, we have found an easy solution to it. Pick your favorite Bluetooth speaker and pair it with the Home device. An additional advantage would be that once you make this speaker as the default device, you need not tell the Home device where the speaker is or fiddle with the controls. Here is how to pair the Google Home Mini with your Bluetooth speaker. Launch the Google Home app. Touch the Devices button in the top right corner. Tap the Menu button in the Devices page and choose Settings. Move down the screen and locate the Paired Bluetooth Devices option. The default speaker menu opes. Make sure the speaker is being put in pairing mode. Long press the Bluetooth button on the speaker to enable the pair...
Read more