Printer problem - HP Officejet 6520 printer [Solved]


Are you using the HP Officejet 6520 printer?
  • At times, when you attempt to print, it may fail to print in black. This particular issue can be due to various reasons such as low ink level, incompatible ink cartridges, etc. If you have refilled the ink cartridge, the print quality may deteriorate.
  • You need to check the ink level periodically. You can view an estimated level of ink in the cartridge either using the HP Smart App or printer’s control panel. Replace the old, empty ink cartridge with a new one.
  • Check if the ink cartridge is compatible with the printer model.
  • You can get genuine cartridges from HP Sure Supply. You need to print a Quality Diagnostic Page. The initial stage of printing a document is to load plain sheets of paper in the tray.
  • Touch the Settings icon on the printer’s control panel.
  • Tap Tools and then select Print Quality report. If there is an issue with the colors bar on the page, wipe the printhead.
  • Now, find the Settings icon on the printer’s control panel. Tap Tools followed by Clean Printhead. If the print quality is unsatisfactory, tap the Clean Again option to perform a deeper cleaning. If there are defects in the printed patterns, align the printhead.
  • Choose the Settings option, locate the Tools option, and then tap the Align Printer option.
  • Once the alignment completes, try to print a document. If you have refilled the ink cartridge, the quality of the printouts may not be satisfactory.
  • You need to install a genuine, compatible HP cartridge.
  • Try to print from the printer.

Comments

Post a Comment

Popular posts from this blog

Printer Issue: Error eMMC 99.39.73 [Solved]

After analyzing the issue that you are facing on your HP LaserJet printer , perform some troubleshooting methods that will help you in resolving the same. Before proceeding the resolving steps, turn off your printer and unplug the power cord. This includes the network cables. Wait for a while and reconnect the same. Print a test page to confirm whether your printer is in the ready state. You have to order a new eMMC to resolve the issue. You need not replace any other components. Important Note: By following the suggestions mentioned below, you can resolve the issue . But in case of damage to any component while performing the steps, can damage the entire machine. If you are unsure of performing the same, it is recommended to service your printer from a trusted retailer. Let us begin the process of servicing your printer. First, remove the formatter cover from your printer. In order to do so, hold the latch on the cover and open the case door by pulling it towards the ...
Read more

Learn How to Pair Your Google Home Mini to a Bluetooth Speaker

For those of us who have been around Google Home Mini, it is a very well known fact that the device is not the best in playing music while faring well in finding music. The device sounds unclear and metallic. So, while the tech giant has all its hands on fixing this issue, we have found an easy solution to it. Pick your favorite Bluetooth speaker and pair it with the Home device. An additional advantage would be that once you make this speaker as the default device, you need not tell the Home device where the speaker is or fiddle with the controls. Here is how to pair the Google Home Mini with your Bluetooth speaker. Launch the Google Home app. Touch the Devices button in the top right corner. Tap the Menu button in the Devices page and choose Settings. Move down the screen and locate the Paired Bluetooth Devices option. The default speaker menu opes. Make sure the speaker is being put in pairing mode. Long press the Bluetooth button on the speaker to enable the pair...
Read more