Top 3 common printer issues need to be fixed


1. Print envelopes on an HP 8710

There are two things to check before you load envelopes into the input tray.

You need to check the location of the paper input tray and the type of your printer. There are a set of guidelines for loading envelopes in different printers. For Inkjet printers with a rear load tray, the front of the envelope should face up and the flap to the left. For Inkjet printers with a front load tray, the front of the envelope faces up with the flap to the left. For LaserJet printers with a front load tray, the front of the envelope need to face up and the flap to the left.

After you have checked which guideline to follow, load the paper and slide in the paper width guides until they are rested against the edges of the envelope. To start printing, search for wordpad in the taskbar search and click on it. Tap the Menu icon and open Page Setup. From that option, choose your envelope type from the Size option, select Landscape orientation, and click OK. Enter the address and make use of the formatting tools present on the Home tab to justify and text. Tap the Menu icon and move your cursor over Print. Select Print Preview to ensure that the address entered is aligned correctly. If needed, make extra changes to align the text properly. Click Print.

To avoid printing an extra envelope, open Wordpad, enter all the addresses in the edit section and remove the mark from Print Page Numbers. You can also print multiple envelopes using Microsoft Word.

2. Not read ink cartridge in hp 8100 printer

One of the causes for this issue to occur might be the stored static electricity. Reset the printer to remove any stored static electricity from the printer. Fix this issue by resetting your printer.

  • Turn on your printer in case it is turned off.
  • Wait until it is silent and idle before you proceed.
  • Be sure that your printer is powered on when you disconnect the power cord from the rear of your device
  • Unplug the power wire from the wall socket.
  • Wait for a minute. Plug the power cable back into the wall outlet.
  • Ensure that you plug the power wire directly into the wall socket.
  • Reconnect the power cable to the back of the printer.
  • Switch on your printer in case it does not automatically turn on.
  • Do not continue further if the printer is not silent and idle.
  • One more way is to change the ink cartridge in your printer.
  • Take out the new cartridge from the printer and replace it with the old cartridge.
  • Don’t do any operation on your computer for the next 10 minutes.
  • Again, replace the old cartridge with the new one.
  • Sometimes, these two steps can solve the problem. If it doesn’t, remove the ink cartridge and keep it on a clean surface.
  • Turn off your printer using the Power button.
  • Unplug the power cable from the printer.
  • Make sure the printer is not in the standby mode when turned off using the Power button on the control panel.
  • Wait for 10 minutes again.
  • Replug the power cable and then insert the new cartridge.
  • Press the Power button.
  • Your issue should be fixed now.
  • 3. HP7520 won't load paper

    The HP Photosmart printers are not new in the market anymore. There are problems arising on the printers related to the paper feed operation in the printer. The Paper Drive Rollers get dry and worn out over time which in turn, causes paper loading problems. Getting a professional repair done on your printer for personal use isn’t cost effective and once it’s out of warranty, there is no point in doing so. In situations like that, it is better to replace the printer. But first, try the simple solutions given here.

    Make sure that the paper you are trying to load isn’t curled or wrinkled. You should use thicker paper, and weight should be around 22 or 24 pound paper rather than an 18 to 22 pound paper. Do not keep the paper in moist conditions for a long duration.

    Other steps can also be carried out to resolve this paper loading issue.

  • Turn off your printer and remove the power wire.
  • The paper feed rollers will turn when the power is off.
  • Open the back access door of the printer by tapping the left side of the access door and pulling it toward you.
  • From that opening, pull the jammed paper free.
  • Take out the remaining paper from the paper supply tray.
  • Re-stack and reload the clean paper in the paper supply tray.
  • Close the back access door by inserting the two pins present on the right of the door into the holes available for them.
  • Close it by pressing it gently on the left side.
  • Comments

    Popular posts from this blog

    Printer Issue: Error eMMC 99.39.73 [Solved]

    Learn How to Pair Your Google Home Mini to a Bluetooth Speaker