HP MFP M277 Laser Printer Black won't print


  • Take the black ink cartridge out of the Laserjet M277 printer.
  • Switch On your printer and located the slots on its sides.
  • Keep your fingers into the two slots and then raise the cartridge access door carefully.
  • The carriage moves to the cartridge access region.
  • Do not proceed until your printer’s carriage does not produce any sound.
  • To remove the cartridge, raise the lid on the slot.
  • Move the lid back until it locks into place.
  • Pull the black ink cartridge to take it out of the slot.
  • Keep the black cartridge aside with the nozzles present on it facing up.
  • Lower the access door and carry out a print task, and then print a test page to ensure your printer can function well using the colored cartridge.
  • It is highly recommended not to utilize incompatible cartridges.
  • Check if the black ink cartridge is genuine and compatible with your Laserjet printer.
  • Verify the ink levels of the cartridges from the front panel of your printer.
  • change the black cartridge if the ink levels are less than the estimated level.
  • Utilize an automated tool to clean the printhead.
  • Touch the Settings option on the front panel of your printer.
  • Press the Tools option and then tap Clean Printhead.
  • The Laserjet printer starts to clean the printhead, and a test report gets printed.
  • Study the page and if the print quality is acceptable, click the Done option.
  • Tap Clean Again if the print quality is not good.
  • The Laserjet printer cleans the cartridges, and it prints another test page. If the problem remains unresolved, service your Laserjet printer.

    • Comments

    Post a Comment

    Popular posts from this blog

    Printer Issue: Error eMMC 99.39.73 [Solved]

    After analyzing the issue that you are facing on your HP LaserJet printer , perform some troubleshooting methods that will help you in resolving the same. Before proceeding the resolving steps, turn off your printer and unplug the power cord. This includes the network cables. Wait for a while and reconnect the same. Print a test page to confirm whether your printer is in the ready state. You have to order a new eMMC to resolve the issue. You need not replace any other components. Important Note: By following the suggestions mentioned below, you can resolve the issue . But in case of damage to any component while performing the steps, can damage the entire machine. If you are unsure of performing the same, it is recommended to service your printer from a trusted retailer. Let us begin the process of servicing your printer. First, remove the formatter cover from your printer. In order to do so, hold the latch on the cover and open the case door by pulling it towards the ...
    Read more

    Learn How to Pair Your Google Home Mini to a Bluetooth Speaker

    For those of us who have been around Google Home Mini, it is a very well known fact that the device is not the best in playing music while faring well in finding music. The device sounds unclear and metallic. So, while the tech giant has all its hands on fixing this issue, we have found an easy solution to it. Pick your favorite Bluetooth speaker and pair it with the Home device. An additional advantage would be that once you make this speaker as the default device, you need not tell the Home device where the speaker is or fiddle with the controls. Here is how to pair the Google Home Mini with your Bluetooth speaker. Launch the Google Home app. Touch the Devices button in the top right corner. Tap the Menu button in the Devices page and choose Settings. Move down the screen and locate the Paired Bluetooth Devices option. The default speaker menu opes. Make sure the speaker is being put in pairing mode. Long press the Bluetooth button on the speaker to enable the pair...
    Read more