Deskjet 2630 - not printing after replace cartridges [Solved]


This issue can be easily overcome by performing the upcoming steps.
  • Check whether you have removed the small protective tape covering the nozzle.
  • Your printer may not recognize the newly installed ink cartridge or may read it as empty if you fail to reset the ink cartridge counter. If the cartridge is stored in sat for a long time, you need to run the extended cleaning to overcome major print issues.
  • Refer to the printer manual to learn how to run the cleaning cycle.
  • Print a test page once you finish running the cleaning cycle.
  • Open the cartridge access door and ascertain that the cartridges are placed in their respective slots.
  • The color of the cartridge should match that of the color of the slot, if not remove and reinsert the cartridges.
  • Press the cartridge properly until you hear a click sound.
  • In some cases the cartridge may not have aligned properly, to overcome this, you need to remove and reinsert the cartridges and print an alignment page.
  • This ensures that your cartridges are aligned properly.
  • You also need to check the ink cartridge contacts properly so that there are no ink leaks or damaged nozzles. If so, clean the printheads carefully.
  • Now print a test page. If you find any smears of streaks of ink on the page, open the HP application on your computer and use the Clean Page Smears option to eliminate this issue.
  • Subscribe to HP Instant ink to get cartridges delivered at your doorstep once they go low.

    • Comments

    Post a Comment

    Popular posts from this blog

    Printer Issue: Error eMMC 99.39.73 [Solved]

    After analyzing the issue that you are facing on your HP LaserJet printer , perform some troubleshooting methods that will help you in resolving the same. Before proceeding the resolving steps, turn off your printer and unplug the power cord. This includes the network cables. Wait for a while and reconnect the same. Print a test page to confirm whether your printer is in the ready state. You have to order a new eMMC to resolve the issue. You need not replace any other components. Important Note: By following the suggestions mentioned below, you can resolve the issue . But in case of damage to any component while performing the steps, can damage the entire machine. If you are unsure of performing the same, it is recommended to service your printer from a trusted retailer. Let us begin the process of servicing your printer. First, remove the formatter cover from your printer. In order to do so, hold the latch on the cover and open the case door by pulling it towards the ...
    Read more

    Learn How to Pair Your Google Home Mini to a Bluetooth Speaker

    For those of us who have been around Google Home Mini, it is a very well known fact that the device is not the best in playing music while faring well in finding music. The device sounds unclear and metallic. So, while the tech giant has all its hands on fixing this issue, we have found an easy solution to it. Pick your favorite Bluetooth speaker and pair it with the Home device. An additional advantage would be that once you make this speaker as the default device, you need not tell the Home device where the speaker is or fiddle with the controls. Here is how to pair the Google Home Mini with your Bluetooth speaker. Launch the Google Home app. Touch the Devices button in the top right corner. Tap the Menu button in the Devices page and choose Settings. Move down the screen and locate the Paired Bluetooth Devices option. The default speaker menu opes. Make sure the speaker is being put in pairing mode. Long press the Bluetooth button on the speaker to enable the pair...
    Read more