Why won’t my Sprocket 200 turn on? [Solved]


  • Test the Power button of your HP Sprocket printer.
  • Discard the paper cover from your HP printer.
  • Find the Reset button on your HP Sprocket printer.
  • Press and hold the Reset button by making use of a paper clip or pin and wait until the Charging Indicator lamp turns Off.
  • The reset process of the HP Sprocket printer starts.
  • Now reinsert the paper cover into your HP printer.
  • Check if your Sprocket printer can turn On.
  • Ensure that the power cable is correctly inserted to the rear of your HP printer.
  • Power cycle the printer by pressing and releasing the Power button.
  • Make sure not to hold down the button. If your HP printer does not turn On, wait for about ten seconds and then force press the Power button again.
  • Proceed with the next steps if the Power indicator light on your printer stays Off.
  • Test the power connection using another compatible cord.
  • Find a power cable that as the same connectors as your cable.
  • You can purchase the compatible cord from the HP Parts Store.
  • Replace the power module of your HP printer.
  • Verify the compatibility of the external power module.
  • Check if the connector on the external power is the same shape and color like the connector present on your HP printer.
  • Try resetting the power module.
  • Unplug the power module from the rear of your printer.
  • Disconnect the cord from the outlet.
  • Do not proceed for at least sixty seconds.
  • Reconnect the cord between your HP printer and the outlet.
  • Verify the status of the indicator light on your printer and then press the Power button to check if the device can turn On.

    • Comments

    Post a Comment

    Popular posts from this blog

    Printer Issue: Error eMMC 99.39.73 [Solved]

    After analyzing the issue that you are facing on your HP LaserJet printer , perform some troubleshooting methods that will help you in resolving the same. Before proceeding the resolving steps, turn off your printer and unplug the power cord. This includes the network cables. Wait for a while and reconnect the same. Print a test page to confirm whether your printer is in the ready state. You have to order a new eMMC to resolve the issue. You need not replace any other components. Important Note: By following the suggestions mentioned below, you can resolve the issue . But in case of damage to any component while performing the steps, can damage the entire machine. If you are unsure of performing the same, it is recommended to service your printer from a trusted retailer. Let us begin the process of servicing your printer. First, remove the formatter cover from your printer. In order to do so, hold the latch on the cover and open the case door by pulling it towards the ...
    Read more

    Learn How to Pair Your Google Home Mini to a Bluetooth Speaker

    For those of us who have been around Google Home Mini, it is a very well known fact that the device is not the best in playing music while faring well in finding music. The device sounds unclear and metallic. So, while the tech giant has all its hands on fixing this issue, we have found an easy solution to it. Pick your favorite Bluetooth speaker and pair it with the Home device. An additional advantage would be that once you make this speaker as the default device, you need not tell the Home device where the speaker is or fiddle with the controls. Here is how to pair the Google Home Mini with your Bluetooth speaker. Launch the Google Home app. Touch the Devices button in the top right corner. Tap the Menu button in the Devices page and choose Settings. Move down the screen and locate the Paired Bluetooth Devices option. The default speaker menu opes. Make sure the speaker is being put in pairing mode. Long press the Bluetooth button on the speaker to enable the pair...
    Read more