Printer Error | HP Officejet Pro 8610 | Solved


HP Officejet Pro 8610 - HOW CAN I CONTINUE TO PRINT WHEN THE BLUE IS OUT

  • The HP printer cannot print if any one of the ink cartridges is low or empty.
  • You can perform printing for a short period.
  • The ink cartridge inside your HP printer needs replacement.
  • You can get the replacement cyan cartridges from local retailers, HP Sure Supply, or HP store.
  • Turn On your Officejet Pro 8610 printer by pressing and holding its Power button.
  • Keep your fingers into the slot that is present at the left side of the HP printer and then raise the access door.
  • Check if the carriage is moving to the left of your HP printer, do not proceed until it remains idle.
  • Push on the cyan cartridge to release and then pull it out from the slot.
  • Open the new packaging cover and take the cyan cartridge out of it.
  • Hold the cyan cartridge in a way so that the contacts in it faces the Officejet Pro printer.
  • Slide the cyan cartridge into its correct slot and gently push it forward until it clicks into place.
  • Ensure that the letter on the ink cartridge and the letter on the slot match each other.
  • Close the access door.
  • The Officejet Pro printer prints an alignment page.
  • It is printed to ensure that the cartridges are inserted correctly into the HP printer. If the alignment report does not get printed, check if the cartridges inside the printer are seated correctly.
  • Place the cyan cartridge properly and then try printing the alignment report again. If the problem stays unresolved, service your HP printer.

    • Comments

    Post a Comment

    Popular posts from this blog

    Printer Issue: Error eMMC 99.39.73 [Solved]

    After analyzing the issue that you are facing on your HP LaserJet printer , perform some troubleshooting methods that will help you in resolving the same. Before proceeding the resolving steps, turn off your printer and unplug the power cord. This includes the network cables. Wait for a while and reconnect the same. Print a test page to confirm whether your printer is in the ready state. You have to order a new eMMC to resolve the issue. You need not replace any other components. Important Note: By following the suggestions mentioned below, you can resolve the issue . But in case of damage to any component while performing the steps, can damage the entire machine. If you are unsure of performing the same, it is recommended to service your printer from a trusted retailer. Let us begin the process of servicing your printer. First, remove the formatter cover from your printer. In order to do so, hold the latch on the cover and open the case door by pulling it towards the ...
    Read more

    Learn How to Pair Your Google Home Mini to a Bluetooth Speaker

    For those of us who have been around Google Home Mini, it is a very well known fact that the device is not the best in playing music while faring well in finding music. The device sounds unclear and metallic. So, while the tech giant has all its hands on fixing this issue, we have found an easy solution to it. Pick your favorite Bluetooth speaker and pair it with the Home device. An additional advantage would be that once you make this speaker as the default device, you need not tell the Home device where the speaker is or fiddle with the controls. Here is how to pair the Google Home Mini with your Bluetooth speaker. Launch the Google Home app. Touch the Devices button in the top right corner. Tap the Menu button in the Devices page and choose Settings. Move down the screen and locate the Paired Bluetooth Devices option. The default speaker menu opes. Make sure the speaker is being put in pairing mode. Long press the Bluetooth button on the speaker to enable the pair...
    Read more