Most common issues to be fixed


    OFFICEJET PRO 8620 SLOW PRINTING

    Don’t worry. We have proven the fix you need.Try out the solutions we have listed below.

  • Unplug the power cord with the printer turned on.
  • Remove the other end of the power cord from the wall outlet.
  • Wait for about 60 seconds and reconnect the power cord.
  • Check whether the issue is resolved by restarting the printer.If not, try to connect the printer using the different USB cable.
  • Send print jobs to the printer to check the issue.Else, change the settings to increase slow print speeds.
  • Search your computer for Printers to open Printers & Scanners.
  • Choose your HP printer name and Manage to open the Printing Preferences.
  • Click on the Paper/Quality tab and ensure that Plain Paper is selected.
  • Open the Print Quality field and check if the Draft or Normal option is enabled.
  • Tap OK or Apply to confirm the changes you made.
  • Confirm that the printer is printing with all the cartridges.If the problem on the printer continues, try to uninstall the current version of the printer driver on your computer.
  • On your computer, search for HP and click Add or Remove Programs.
  • Choose your HP printer name from the displayed list of results.
  • Click the Uninstall button after selecting the printer driver program.
  • Open the printer’s manufacturer’s site on a browser and type your printer name as HP Officejet Pro 8620 in the search field.
  • Click the Download button next to the full feature driver.
  • Carry out the installation process with the help of on-screen instructions.
  • Always make sure the wireless signal strength is strong enough, and the devices like computer and printer are placed close to the router.
  • Try to update the printer firmware as the final step.
    HP PRINTER 6830 SCANS IN BLACK BY NOT WHEN DOCUMENT IS SENT BY THE COMPUTER

    It seems that you face issues with printing only in black ink. You need to check the following requirements to get an accurate solution.

  • Ensure that you have installed the genuine cartridges supplied by HP.
  • Check whether you have recently made any changes in the Settings.
  • Confirm if the printer driver is up to date. If not, uninstall and revised the latest version of it from the manufacturer’s site.
  • After installing the ink cartridges, make sure you print an alignment page.
  • Take the printed alignment page from the output tray and place it on the printer’s scanner glass.
  • Tap OK on the control panel to begin the ink cartridge alignment.
  • The printer aligns the installed ink cartridges and calibrates the product.
  • Check your printer settings under the Print option.
  • Go to the Properties dialog box and click Printer Preferences.
  • Select the Print Quality option to increase the quality of your print.
  • You can also choose more options like Best, Normal, and Draft modes based on your print file.
  • Select the feature called Black and White and enable the grayscale option if you want to print in black and white.
  • Click OK after selecting print settings.
  • Take a test page print to check the ink levels and quality of the print.If all the above troubleshooting steps did not help you, try the following.
  • Perform a hard reset on the HP printer to resolve the issue.
  • Unplug the power cable with the printer turned on, and remove the USB cable if any.
  • Wait for at least 2 to 3 minutes to perform a reset process.
  • Press the Power button and hold it for about 30 seconds.
  • Replug the power cord and turn on your HP printer and check if the issues are fixed on your printer.

Comments

Post a Comment

Popular posts from this blog

Printer Issue: Error eMMC 99.39.73 [Solved]

After analyzing the issue that you are facing on your HP LaserJet printer , perform some troubleshooting methods that will help you in resolving the same. Before proceeding the resolving steps, turn off your printer and unplug the power cord. This includes the network cables. Wait for a while and reconnect the same. Print a test page to confirm whether your printer is in the ready state. You have to order a new eMMC to resolve the issue. You need not replace any other components. Important Note: By following the suggestions mentioned below, you can resolve the issue . But in case of damage to any component while performing the steps, can damage the entire machine. If you are unsure of performing the same, it is recommended to service your printer from a trusted retailer. Let us begin the process of servicing your printer. First, remove the formatter cover from your printer. In order to do so, hold the latch on the cover and open the case door by pulling it towards the ...
Read more

Learn How to Pair Your Google Home Mini to a Bluetooth Speaker

For those of us who have been around Google Home Mini, it is a very well known fact that the device is not the best in playing music while faring well in finding music. The device sounds unclear and metallic. So, while the tech giant has all its hands on fixing this issue, we have found an easy solution to it. Pick your favorite Bluetooth speaker and pair it with the Home device. An additional advantage would be that once you make this speaker as the default device, you need not tell the Home device where the speaker is or fiddle with the controls. Here is how to pair the Google Home Mini with your Bluetooth speaker. Launch the Google Home app. Touch the Devices button in the top right corner. Tap the Menu button in the Devices page and choose Settings. Move down the screen and locate the Paired Bluetooth Devices option. The default speaker menu opes. Make sure the speaker is being put in pairing mode. Long press the Bluetooth button on the speaker to enable the pair...
Read more