IS THERE AN EASY WAY TO FEED A SINGLE SHEET OR ENVELOPE INTO THE 8610 OR 8710


  • You can place the envelopes only into the Tray 1 or main input tray of your HP printer.
  • Ascertain to insert the envelopes correctly, else it can cause an error, and the print job can be accessed.
  • The envelopes should not be loaded into the input tray 2 of your Officejet Pro printer.
  • Pull the main input tray out of the HP printer.
  • Place the envelopes into the input tray with the side to be printed facing downwards.
  • Load the envelope according to the graphics present inside the input tray.
  • Ensure that the stack of envelopes does not go ahead of the line marking available in the main input tray.
  • Move the sliders or paper width guides until they touch the edges of the loaded envelope papers.
  • Reinsert the tray into your HP Officejet Pro printer.
  • Slide the output tray extension until the intended size of the envelope paper is reached.
  • Make sure you place the sliders correctly, else you can't access any of the functions of your HP printer.

    • Comments

    Post a Comment

    Popular posts from this blog

    Printer Issue: Error eMMC 99.39.73 [Solved]

    After analyzing the issue that you are facing on your HP LaserJet printer , perform some troubleshooting methods that will help you in resolving the same. Before proceeding the resolving steps, turn off your printer and unplug the power cord. This includes the network cables. Wait for a while and reconnect the same. Print a test page to confirm whether your printer is in the ready state. You have to order a new eMMC to resolve the issue. You need not replace any other components. Important Note: By following the suggestions mentioned below, you can resolve the issue . But in case of damage to any component while performing the steps, can damage the entire machine. If you are unsure of performing the same, it is recommended to service your printer from a trusted retailer. Let us begin the process of servicing your printer. First, remove the formatter cover from your printer. In order to do so, hold the latch on the cover and open the case door by pulling it towards the ...
    Read more

    Learn How to Pair Your Google Home Mini to a Bluetooth Speaker

    For those of us who have been around Google Home Mini, it is a very well known fact that the device is not the best in playing music while faring well in finding music. The device sounds unclear and metallic. So, while the tech giant has all its hands on fixing this issue, we have found an easy solution to it. Pick your favorite Bluetooth speaker and pair it with the Home device. An additional advantage would be that once you make this speaker as the default device, you need not tell the Home device where the speaker is or fiddle with the controls. Here is how to pair the Google Home Mini with your Bluetooth speaker. Launch the Google Home app. Touch the Devices button in the top right corner. Tap the Menu button in the Devices page and choose Settings. Move down the screen and locate the Paired Bluetooth Devices option. The default speaker menu opes. Make sure the speaker is being put in pairing mode. Long press the Bluetooth button on the speaker to enable the pair...
    Read more