HOW TO SETUP PRINTER CARTRIDGE ?


  • A message Use Setup Cartridges appears on the control panel of your printer or computer.
  • Use Setup ink cartridges that come with your printer to set up the device for the first time.
  • The Setup ink cartridges are specially designed to set up and calibrate the ink levels on a new HP printer.
  • They cannot be bought from retailers. If your printer does not come with Setup ink cartridges, return the package to the retailer.
  • You cannot reuse the Setup ink cartridges to set up a new printer or replace the printhead.
  • Your printer may show an error if the ink cartridges are not installed properly. Resetting your printer can fix some Ink cartridge issues. It aids you in removing any stored static electricity from your Printer which may cause an error.
  • Turn On your printer.
  • Wait until your printer becomes idle and silent before you proceed. With your device turned On, unplug the power cable from the printer.
  • Disconnect the power cable connected to the electrical outlet and wait for a few seconds.
  • Connect the power cable back to the electrical outlet. It is recommended to connect the power cord of your printer straight into the wall socket.
  • Plug the power cord back to the printer.
  • Turn On your printer if it does not power up automatically.
  • Wait until your printer becomes idle and silent before you continue. If the above points do not help, replace the ink cartridge which is highlighted on the control panel of your printer.

    • Comments

    Post a Comment

    Popular posts from this blog

    Printer Issue: Error eMMC 99.39.73 [Solved]

    After analyzing the issue that you are facing on your HP LaserJet printer , perform some troubleshooting methods that will help you in resolving the same. Before proceeding the resolving steps, turn off your printer and unplug the power cord. This includes the network cables. Wait for a while and reconnect the same. Print a test page to confirm whether your printer is in the ready state. You have to order a new eMMC to resolve the issue. You need not replace any other components. Important Note: By following the suggestions mentioned below, you can resolve the issue . But in case of damage to any component while performing the steps, can damage the entire machine. If you are unsure of performing the same, it is recommended to service your printer from a trusted retailer. Let us begin the process of servicing your printer. First, remove the formatter cover from your printer. In order to do so, hold the latch on the cover and open the case door by pulling it towards the ...
    Read more

    HP COLOR LASERJET PRO MFP M177FW SCREEN FROZEN ON HP LOGO AND ENERGY STAR ICON

    There is a list of solutions that are available for the issue mentioned below. Try them out to check if you can resolve the issue . Check if you have connected an ethernet, USB or fax cable to the printer. If yes, then unplug it from the printer to avoid such issues. Verify if you are using a surge protector to connect the printer to the power supply. This might cause the freezing problem with your HP printer . Remove the protector and connect the HP printer to the power outlet directly. The next solution is to clear the print spooler. Go to the Start icon and choose the Run option. In the window that appears, enter net stop spooler and press the Enter button present on your keyboard. The files present in C:\WINDOWS\SYSTEM32\SPOOL\PRINTER folder will open. Delete all the files that are available within this folder. Now, go to the Start button again and open the Run window. Key in net start spooler in the window and tap the Enter button. Delete the printer driver a...
    Read more

    HP PRINTER 4025 ERROR 59.F0 [SOLVED]

    Error 59.F0 displays in the HP printer 4025 while printing the document. This displays due to several reasons . Troubleshooting the few internal hardware of printer will bypass this error. Verify that the ITB (image Transfer Belt) installed properly. ITB rotating belt which carries the mixture of different colors of toner particles. ITB may be stuck and not able to rotate this causes the printer error 59.F0. Reseat the ITB. To reseat the ITD, follow the steps below. Power on the device. Open the front door and remove all the cartridges, and then cover the cartridges to avoid excessive light exposure. Now open the upper right door of the printer. Grasp the blue lever on both sides, and apply slight pressure to pull ITB towards you at a downward angle. Pull the ITB out of the device until two large handles expand. If the ITB flag is damaged or broken, replace it with a new one. Check if the ITB gear is working correctly. Lift the ITB and tab gently by holding the ha...
    Read more