Envy 4520 not printing color !


    1. Check the ink levels of your cartridge.
    2. You can determine the ink levels from the operation panel of your Envy 4520 printer.
    3. Tap the Cartridge or Ink Drop icon to view the ink levels on your printer’s screen.
    4. Change the black or tri-colored ink cartridges if the ink levels are low or empty.
    5. Force press the Power button of your Envy 4520 printer to turn it On.
    6. Find the cartridge access door on your HP printer and then raise it.
    7. Do not continue until the carriage does not produce any noise.
    8. Get the replacement cartridges and ensure that they are compatible with the model of your Envy printer.
    9. Take the new cartridge out and then discard the plastic tape.
    10. Handle the cartridge by its sides with the nozzles facing the Envy 4520 printer’s rear.
    11. Push the new cartridge forward until it clicks into place.
    12. Check if you have placed the cartridge into its proper slot.
    13. Lower the cartridge access door and then carry out a print operation.
    14. Wait until the Envy 4520 printer prints an alignment page.
    15. Remove the alignment page and then insert it into the scanner lid.
    16. Make sure to load the page with the printed side facing down on the glass and then lower the scanner lid.
    17. Press the Scan button and the ENVY 4520 printer starts aligning the cartridges. If the issue still continues, make use of an automated tool for cleaning the cartridges.
    18. The steps to clean the cartridges vary based upon your Windows or Mac device.
    19. Update the firmware from the printer’s panel and verify if the issue is rectified.

Comments

Post a Comment

Popular posts from this blog

Printer Issue: Error eMMC 99.39.73 [Solved]

After analyzing the issue that you are facing on your HP LaserJet printer , perform some troubleshooting methods that will help you in resolving the same. Before proceeding the resolving steps, turn off your printer and unplug the power cord. This includes the network cables. Wait for a while and reconnect the same. Print a test page to confirm whether your printer is in the ready state. You have to order a new eMMC to resolve the issue. You need not replace any other components. Important Note: By following the suggestions mentioned below, you can resolve the issue . But in case of damage to any component while performing the steps, can damage the entire machine. If you are unsure of performing the same, it is recommended to service your printer from a trusted retailer. Let us begin the process of servicing your printer. First, remove the formatter cover from your printer. In order to do so, hold the latch on the cover and open the case door by pulling it towards the ...
Read more

Learn How to Pair Your Google Home Mini to a Bluetooth Speaker

For those of us who have been around Google Home Mini, it is a very well known fact that the device is not the best in playing music while faring well in finding music. The device sounds unclear and metallic. So, while the tech giant has all its hands on fixing this issue, we have found an easy solution to it. Pick your favorite Bluetooth speaker and pair it with the Home device. An additional advantage would be that once you make this speaker as the default device, you need not tell the Home device where the speaker is or fiddle with the controls. Here is how to pair the Google Home Mini with your Bluetooth speaker. Launch the Google Home app. Touch the Devices button in the top right corner. Tap the Menu button in the Devices page and choose Settings. Move down the screen and locate the Paired Bluetooth Devices option. The default speaker menu opes. Make sure the speaker is being put in pairing mode. Long press the Bluetooth button on the speaker to enable the pair...
Read more